Today let us talk about how to operate the laser die cutting machine safety.Here is somthing we should pay attention as below:

1. The operator must be trained to be familiar with the structure and performance of the laser die cutting machine and master the knowledge of the operating system of the laser die cutting machine.

2. When an abnormality is found during the processing for the laser die cutting machine , it should be stopped immediately, and the fault should be eliminated or reported to the competent personnel in time.

3. Obey the safe operation rules of the laser die cutting machine. The laser is started strictly accordance with the laser start-up procedure of the laser die cutting machine.

4. Wear labor protection articles as required, and wear protective glasses that meet the requirements in the vicinity of the laser beam.

5. Keep the laser, bed and surrounding area clean, orderly and free of oil for the laser die cutting machine, and stack the workpiece, sheet and waste according to regulations of the laser die cutting machine.

6. When the equipment is started, the operator must not leave the post or trust the person to be in charge. If it is necessary to leave, the laser die cutting machine power switch should be cut off.

7. Do not process a material before it can be irradiated or heated with a laser to avoid the potential hazard of smoke and vapor.

8. Keep the fire extinguisher at your fingertips; turn off the laser or shutter when the laser die cuttiung machineis not working; do not place paper, cloth, or other flammable materials near the unprotected laser beam of the laser die cutting machine.